Product Description; Introduction; Equipment And Scope Of Delivery - Mettler Toledo InPro 7100-VP Série Manuel D'utilisation

Masquer les pouces Voir aussi pour InPro 7100-VP Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

InPro 7100-VP Series
1

Product description

1.1

Introduction

Thank you for buying this InPro
sensor from METTLER TOLEDO. InPro 7100-VP Series 4-electrode conduc-
tivity sensors are intended to be used to measure conductivity in medium
to high conductivity water. The sensors are available in a wide selection of
process connections to meet every application need.
Markings
The printed markings on each InPro 7100-VP Series 4-electrode conductivity
sensor contain the following information:
Mettler Toledo
InPro 710X-VP
Cell M: XXXXXX
Temp M: XXXXXX
Serial No: XXXXXXXXX
Ex-classification
Examination certificate number: SEV 14 ATEX 0129 X
Notified body:
1.2

Equipment and scope of delivery

Scope of delivery
The InPro 7100-VP Series sensors are delivered ready for use. Each sen-
sor is accompanied by this instruction manual, an individual «Certificate
of Quality», a Material Certificate following EN 10204 (3.1B) and a CE
Declaration of Conformity Certificate. Other Certificates may be included as
specified for the individual product description. Please check that the details
given in the Certificate of Quality match the sensor label. For each sensor, the
relevant cell constant has been de termined individually in solutions of known
conductivity at 18 – 25 °C (64 – 77 °F) during the manufacturing process,
and the value documented in the accompanying «Certificate of Quality».
© 02 / 2017 Mettler-Toledo GmbH, CH - 8606 Greifensee
Printed in USA
7100-VP Series 4-electrode conductivity
®
Sensor manufacturer
Type of sensor
Cell constant
Temperature constant
Serial number
II I/2 G Ex ia IIB T3/T4/T5/T6 Ga/Gb
(plastic sensors )
Electrosuisse SEV, (No.: 1258)
InPro 7100-VP Series
52 002 092
5

Publicité

Table des Matières
loading

Table des Matières