Returning The Device - Burkert 8718 Manuel D'utilisation

13. reTurning The device
To return a device already in use, you will require an authorization number!
If you would like to return a device already in use to Bürkert, proceed as follows:
→
Complete the Contamination Declaration included with the original documents.
→
Send the declaration to the address indicated on the form.
Bürkert will fax or e-mail you an authorization number to return the device.
→
Pack the device in consideration of the information in Chapter
→
Return the device to Bürkert quoting this authorization number and the Contamination Declaration.
A ddress:
B ürkert Fluid Control Systems
Corporate Quality / Complaint Management
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 599
Fax + 49 (0) 7940 - 10 91 490
E-mail: service.international@burkert.com
no work or tests will be carried out on the device until there is a valid contamination declaration.
The Contamination Declaration can be downloaded from our Homepage or requested from Bürkert
Ingelfingen.
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
www.burkert.com Documentation Operating Instructions Type Declaration on contamination
50
english
Type 8718, 8719 / 8708, 8709

Returning the device

12.1. Packing, Transporting.