C
AUTO SEAL
Your helmet SKWAL 2 has a patented system
SHARK "AUTOSEAL". This system ensures a
perfect sealing of the visor by clinging the visor
on the seal, by spring effect backward the visor
when it is in lower position.
SUN VISOR.
SHARK SKWAL 2 is equipped with a sun visor
with an integrated external control.
This ergonomic command allows to ope-
rate the visor from the outside with ease and
whatever the type of gloves worn, offering you
a fast and full protection security. The R&D
department has developed a mechanism
for obtaining a progressive movement of the
control. The sun visor has a 380 UV protection
to filter out 100% of UVA and UVB.
WARNING! This sun visor cannot be used
when the light is strong and you ride in an
area where you may have a sudden change in
visibility (ex tunnel). In all cases where visibi-
lity is reduced, the beginning or end of the day,
night, rain or fog, the sun visor must be set
high to not to degrade your vision.
AUTO SEAL - SUN VISOR
D
The visor is operated by the button located
on the left side of the helmet (A-B).MAINTE-
NANCE.
For protection and improve its life, the outer
surface of your sun visor SHARK SKWAL 2 is
anti-scratch treated. When cleaning the screen,
use lukewarm water (below 40 degrees) and
a soft cloth (100% cotton and lint) to wipe the
screen. Neutral soap as "savon de Marseille"
can help you clean up.
WARNING!
shield no longer provides you with
clear visibility, you must immediately replace
it. Never ride if your sun shield is scratched,
dirty, foggy or with your vision obscured in any
way. Always ride with perfect visibility. Never
ride with the sun shield as eye protection. You
must always ride with the visor in the lowered
position.
If your visor and/or sun
9