The Sun Shield - shark SKWAL 2 Manuel D'utilisation

Masquer les pouces Voir aussi pour SKWAL 2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SUN VISOR
REMOVAL (A)
- Move the sun shield to the lower position (A).
- Pull the sun shield delicately downward.
- Pull the sun shield forward, one side at a
time, to unclip it from the mounting points in
(C-1).
the helmet
REPLACEMENT (B)
- Move the handling button to the low position
(A).
- Push, at one side at a time, the sun shield
forward to clip it onto the mounting points in
(C-1).
the helmet
- And then clip the sun shield back on by lifting
(C-1).
it slightly
WARNING! If you are not sure that you pro-
perly replaced the sun shield, do not use the
helmet. The sun shield could suddenly and without
warning become detached from the helmet while ri-
ding, causing you to lose control of your motorcycle,
resulting in an accident, personal injury, or death.
Contact your retailer for any assistance or advice.
A
10
(B-1).
B
C
C
B-1
B-1
C-1
C-1
C-1
C-1

Publicité

Table des Matières
loading

Table des Matières