Further Settings - STEAMAX CB-80 Manuel D'utilisation

STEAMAX CB - 80 – SELECTION & OPERATION OF THE MENUS
Setting of the Temperature Coefficient of Resistance in TCR Mode
While the device is switched off, simultaneously press the fire button and the"UP"-adjustment
button to set the temperature coefficient of resistance for the memory locations M1 | M2 | M3
within a range of 1 to 999. Press the fire button to change between the memory locations. Set the
TCR value by pressing the "down"/"up" adjustment buttons. After about five seconds, your selection
will automatically be accepted.
Settings regarding the Preheat Function
While the device is switched off, simultaneously press the fire button and the "UP"-adjustment
button to make settings regarding the preheat function. Press the fire button three times to adjust
the intensity of the preheat function within a range of 1 to 80 watts. Navigate by pressing the
"down"/"up" adjustment buttons. Press the fire button once more to set the preheat time within
a range of 0.1 to 2.0 seconds. Navigate by pressing the "down"/"up" adjustment buttons. Navigate
below the value of 0.1 seconds to deactivate the preheat function. After about five seconds, your
selection will automatically be accepted.

Further Settings

While the device is switched on, press the fire button twice to activate or deactivate the display of
the downloadable logo. Navigate by pressing the "down"/"up" adjustment buttons. Press the fire
button to confirm your selection.
While the device is switched off, press the fire button ten times to display the inner temperature of
the PCBA. This will switch the device on.
While the device is switched off, simultaneously press the fire button and the "DOWN"-adjustment
button to display the remaining capacity of the battery in volts.
73
www.steamax.com