Please Note The Following - STEAMAX CB-80 Manuel D'utilisation

STEAMAX AMOR NS PRO – COMMISSIONING OF THE DEVICE

Please note the Following:

Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit before vaping. Plea-
se take several puffs without activating the atomizer and leave the atomizer head sit for 15 minutes in
the e-liquid filled tank before use. Don't clean atomizer heads with water. Because atomizer coils are
wearing parts, they must be changed regularly.
Adjusting the Air Supply
There is a airflow control ring located on the head base of the device. It can be adjusted by slightly
turning and is adaptable to your vapor preferences. The more air flows through the device (the more
the slots are open), the lower is the drawing resistance. Pay particular attention to a sufficient air supply
during sub-ohm vaping.
Changing the Mouthpiece
The mouthpiece is placed on the top cap of the Clearomizer. It can be removed by gently pulling up and
once again attached by applying gentle pressure on clearomizer. The mouthpiece may be cleaned with
warm water. Make sure that it is completely dry before reinserting into the clearomizer.
67
www.steamax.com