STEAMAX CB-80 Manuel D'utilisation page 74

STEAMAX CB - 80 – SELECTION & OPERATION OF THE MENUS
Change between the Vaping Modes
Press the fire button three times in quick succession while the device is switched on. The curent
vaping mode is displayed. Navigate through the available vaping modes by pressing the "down"/"up"
adjustment buttons. Press the fire button to confirm your selection.
Settings in VW Mode
While the device is switched on, simultaneously press the fire button and the "UP"-adjustment button
to choose, whether the current in ampere (A), the total vaping time in seconds (S), or the number of
puffs taken so far (P) is displayed at the start screen. While the currently selected value flashes, na-
vigate through the selection by pressing the "down"/"up" adjustment buttons. Press the fire button to
confirm your selection. To reset the time or puff counter, simultaneously press the adjustment buttons
while the corresponding value flashes. Press the fire button to finish the process.
Settings in TC/TCR Mode
While the device is switched on, simultaneously press the fire button and the "UP"-adjustment button
to lock or unlock the resistance value for temperature measurement.
Note
This function should only be used at room temperature, to ensure that the correct "base resistance"
is locked. Otherwise, wrong measurement results may occur, which can also have a negative effect on
the protective functions.
www.steamax.com
72