Publicité
Les langues disponibles
Les langues disponibles
Description of Motor, Sound intensity level, Safety instructions hand nozzle
Integral no-volt release
Motors with the integral no-volt release function are secured
against accidental start-up following
interruption of the operating voltage (see rating plate U<)
Motors with the no-volt release function cannot be remote-
controlled.
The motor can only be restarted by pressing the on/off button.
Sound intensity level
The sound intensity level of this pump is = 75 dB (A)
(measured on the manufacturer's pump test stand)
Safety instructions Hand nozzle
Transfer clean and uncharged liquids only.
Do not exceed maximum operating pressure of 2 bar at 60°C.
When filling into a container, make sure that no excess
pressure will be built up - danger of liquid splashing.
Do not transfer liquid at high speed to avoid splashing
of liquids.
Comply with all relevant safety instructions.
Wear appropriate protective clothing.
(face shield, protective gloves, etc.)
Ensure that the hose is securely fixed to the hosetail.
Do not mechanically overstress swivel joint. Hand nozzle
is not appropriate for pulling the flexible hose.
To avoid mechanical stress on the hand nozzle,
slightly bend the flexible hose only.
The hand nozzle may not be used for liquids which are
not compatible with its materials of construction (nozzle housing,
nozzle valve, seal, hose ...). Also confer to resistance chart.
Never leave the hand nozlzle unattended, because
it does not close automatically.
15
.
Publicité
