Télécharger Imprimer la page

ProMinent DULCO Trans 40/1000 PVDF Mode D'emploi page 12

Publicité

Les langues disponibles

Les langues disponibles

Scope of supply, Intended use, Foreseeable misuse
Scope of supply
 Pump DULCO Trans 40/1000 PVDF
 PVC-hose complete with hose connection
 Hand nozzle PVDF fitted to the PVC-hose
 Barrel Connector PP - G 2 A
Intended use
The barrel pumps are used for quick and save liquid transfer or emptying
of tanks, barrels and containers. According to the design, they can pump
liquids of all kinds.
The commutator motors are used to drive barrel pumps in non-hazardous
areas and for inflammable liquids.
Hand nozzles allow for convenient filling of liquids.
Barrel pumps, motors and hand nozzles are not made for unprotected
outdoor applications and must not be exposed to the weather.
The use of hand nozzle as used in filling stations is not allowed (TRBF40).
The barrel pumps, motors and hand nozzles are intended for commercial
use only.
Foreseeable misuse
Pump and accessory material must always be suitable for the product to
be transferred (see resistance chart).
Observe the operating instructions when changing the liquid. Take possible
chemical reactions and the resulting health hazards and material damage
into account.
Only operate the motors in conjunction with the pumps in the correspon-
ding liquids. Non-observance may result in damage to the pump and the
motor and operator injury.
The barrel pumps and the accessories are not intended to be used by
uninstructed persons or by persons with limited physical, sensory or intel-
lectual capabilities, unless they are supervised by a person responsible for
their safety or receive instructions from that person on how the device is to
be used.
Children should be supervised to ensure that they do not play with the
device.
12

Publicité

loading