LENCO DVP-754 Mode D'emploi page 14

3. SETUP Menu Setting
Preference Page
PAL - Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and
output in PAL format.
NTSC - Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and
output in NTSC format.
Auto: Chang the video signal output automatic according to the playing disk format.
Audio: Selects a language for audio (if available).
Subtitle: Selects a language for subtitle (if available).
Disc Menu: Selects a language for disc menu (if available).
Default: Back to the factory setting.
4. Parameters and specifications
Technical parameters
Item
Power requirements
Power consumption
Operating humidity
VIDEO OUT
AUDIO OUT
Audio
System
Laser
Signal system
Frequency response
Signal-to-noise ratio
Dynamic range
Note: Design and specifications are subject to change prior notice.
: AC 100-240 V, 50/60 Hz
: <10W
: 5% to 90%
: 1 Vp-p (75Ω)
: 1.2 Vrms (1 KHz, 0dB)
: Speaker: 1Wx2, Headphones output
: Semiconductor laser, wavelength 650 nm
: NTSC/PAL
: 20 Hz to 20 kHz (1 dB)
: More than 80 dB (ANALOG OUT connectors only)
: More than 85 dB (DVD/CD)
14
Standard requirement