Programming The Robot - ECOVACS ROBOTICS Deebot N79SE Manuel De L'utilisateur

3.4 Programming the Robot

DEEBOT has a Time Scheduling function. DEEBOT can be programmed to automatically clean at a
specific time using the Remote Control, even if nobody is at home. The current time of day and the
cleaning times are scheduled using the Remote Control.
* All scheduled cleanings are performed in AUTO Cleaning Mode.
* The Remote Control uses a 12-hour clock with "AM" and "PM" indicators.
* DEEBOT loses the current time of day and schedule once it is powered OFF. Reset the
current time of day and schedule the cleaning time when power on the DEEBOT again.
* It is suggested to keep it powered ON and charging instead of powered OFF.
Set the Current Time of Day
Press button on the Remote Control and the
"hour" (first two digits) flashes on the Remote
Control LCD Screen.
Press button on the Remote Control to
confirm and save the current time of day.
3. Operating and Programming
Press the up and down Direction Control
Buttons to adjust "hour" and "minute" number.
Press the left and right Direction Control Buttons
to switch between "hour" and "minute."
15
EN