Programming The Robot - ECOVACS ROBOTICS DEEBOT Manuel De L'utilisateur

5 Return to Charger Mode
When battery power gets low, DEEBOT 7 automatically switches to Return to Charger Mode and
returns to the Charging Dock to recharge itself.
DEEBOT 7 can be sent back to the Charging Dock at any time by pressing the Mode Selection Button
on the robot until the Return to Charger Mode Indicator appears on the robot's Control Panel Screen,
then press START/PAUSE. Or press the Return to Charger Mode Button on the Remote Control.

3.4 Programming the Robot

DEEBOT 7 has a Time Scheduling function. DEEBOT 7 can be programmed to automatically
clean once per day, at a specific time, even if nobody is at home.
*
All scheduled cleanings are performed in Automatic Cleaning Mode. DEEBOT 7 has Dust
Sensors that constantly monitor dust volume and automatically change DEEBOT 7 to the most
effective cleaning pattern.
1 Schedule the Cleaning Time
With DEEBOT 7 powered ON, press and hold
on the robot's Control Panel for 3 seconds until
on the Control Panel Screen appears and the
time setting numbers flash.
Press and on the robot's Control Panel to
adjust the "hour." Press
and "minute" number will blink. Press
adjust "minute," and press
For example: Schedule DEEBOT 7 to clean
at "09:00." DEEBOT 7 automatically cleans at
09:00am every day.
3. Operating and Programming
to confirm the hour
and to
to confirm.
3 3
13
EN