3. Operating and Programming
2
Spot Cleaning Mode
(1-5 minutes)
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning Mode,
DEEBOT focuses on a specific area to clean.
3
Edge Cleaning Mode
This mode is good for cleaning the edges and
corners of a room. In Edge Cleaning Mode,
DEEBOT cleans along a border (e.g. wall).
3.4 Programming the Robot
DEEBOT can be programmed weekly to clean multiple times per day at specific times using the
ECOVACS App.
3.5 Optional Mopping System
DEEBOT has an optional Mopping System using a Washable/Reusable Microfiber Cleaning
Cloth and Cleaning Cloth Plate attached to a proprietary Reservoir. The washable/reusable
Cleaning Cloth automatically damp mops the floor to a spotless clean.
* Empty the Reservoir and remove the Cleaning Cloth Plate before cleaning on carpet.
* When using the mopping system, fold area rug edges under themselves so DEEBOT will
avoid the rug.
* After DEEBOT finishes mopping, empty any remaining water from the Reservoir.
* Empty any remaining water from the Reservoir and remove the Cleaning Cloth Plate before
charging DEEBOT.
* Always keep the Reservoir installed when the robot is cleaning or charging.
16
FR-CA
EN