Quick Start - ECOVACS ROBOTICS Deebot N79SE Manuel De L'utilisateur

3. Operating and Programming

3.2 Quick Start

1 Charging Dock Placement
■
Connect the Power Adapter to the Charging Dock.
■
Place the Charging Dock on a level floor surface against the wall with the base perpendicular
to the ground. Keep the immediate area 2m (6.6') in front of the charger and 1 m (3.3') on both
sides of the charger clear of objects and reflective surfaces.
■
Plug the Charging Dock in. The Power Indicator Light on the Charging Dock glows.
Install Side Brushes
2
■
Attach Side Brushes to the bottom of
DEEBOT by pressing a brush into each
slot until it clicks.
Power ON
3
■
Turn the robot's Side Power Switch to
the ON position. "l" indicates ON and
"O" indicates OFF. DEEBOT is powered
ON when
BLUE.
* When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging instead
of powered OFF.
10
EN
button glows a continuous