Programming The Robot - ECOVACS ROBOTICS DEEBOT 8 Mode D'emploi

3. Operating and Programming
Return to Charger Mode
When battery power gets low, DEEBOT 8 automatically switches to Return to Charger Mode and
returns to the Charging Dock to recharge itself.
DEEBOT 8 can also be sent back to the Charging Dock at any time by Pausing DEEBOT 8, then
pressing the Return to Charger Mode Button on the robot's Control Panel (D83 model ONLY), or
pressing the Return to Charger Mode Button on the Remote Control twice.

3.4 Programming the Robot

DEEBOT 8 has a Time Scheduling function. DEEBOT 8 can be programmed to automatically
clean once per day, at a specific time, even if nobody is at home. The current time of day
and the cleaning time are scheduled using the Remote Control.
* All scheduled cleanings are performed in AUTO Cleaning Mode.
Before programming the robot, press any button on the Remote Control to wake up the Remote
*
Control LED Screen. The Remote Control uses a 12-hour clock with "AM" and "PM" indicators.
Set the Current Time of Day
1
Press button on the Remote Control until
flashes, and
Control LED Screen.
12
EN
illuminates on the Remote