Pre-Heating The Cups; Care And Cleaning - SOLIS CREMA SL 90 Mode D'emploi

User's manual
The amount selected is displayed
automatically by LED numbers. They
remain programmed even if the appli-
ance is switched off. Pressing the
coffee key automatically doubles
the quantity to give two cups.
Note: You can stop pouring at any
time by briefly pressing the coffee key
or .

9.0 Pre-heating the cups

Apart from the type of blend and the
quality of the water, the most impor-
tant factor in making a good cup of
coffee is getting the right temperature.
9.1 The SL 90 is fitted with an
actively heated warming plate
When necessary, switch the plate on,
using the key and place the espres-
so cups on top. In this way, they are
always warm when needed. To save
electricity, switch the plate off when it
is not needed.
9.2 If you need to heat cups
quickly, you can rinse them out with
hot water from the hot water nozzle.

10.0 Care and cleaning

If you always keep your SOLIS CREMA
machine clean, you will be sure of
good quality coffee and will extend the
useful life of the appliance.
10.1 Daily and weekly care
Regularly clean the water container,
the drip tray, the cup tray, the filter
holder and the filter inserts. Simply
use hot water and, when necessary, a
non-scouring detergent.
DO NOT place in the dishwasher!
Brewing unit: Remove coffee resi-
dues regularly and wipe with a clean
damp cloth. We recommend you to let
about half a litre of hot water run
through from time to time, as this
keeps the brewing unit clear of fat
residues.
SOLIS CREMA SL 90
55