Making Coffee With Portions - SOLIS CREMA SL 90 Mode D'emploi

SOLIS CREMA SL 90
4.5 As soon as your cup is full,
briefly press the key or
will stop the pouring.
Note: The SL 90 model can be pro-
grammed to deliver a preset quantity of
water for both one or two cups. See
the programming section.
You can stop pouring at any time simp-
ly by pressing the switch /
4.6 Now remove the filter holder
from the brewing unit by moving it
from right to left. Holding the filter
firmly with the filter holder, knock out
the grounds.
Note: You can use a special SOLIS tray
for your grounds (see Section 14.0,
recommended accessories).
Rinse the filter under running water and
replace the filter holder in the brewing
unit. Once the filter has been refilled,
the next cup of coffee can be prepared.
52
.This
.

5.0 Making coffee with portions

It is assumed that the appliance has
been started up in accordance with
Point 3 and is ready to operate, i.e.
the container has been filled with
water and the temperature light
showing green.
5.1The procedure is just the same
as for ground coffee, except that
the following points must be obser-
ved.
Please prepare SOLIS coffee portions
(see adjacent illustration and section
14.0 «Recommended accessories»)
with the special portion-filter insert
only, and do not use the 1 or 2 cup fil-
ter. The portion filter is specially desi-
gned for the «hard» portion bags.
«Soft» SOLIS portions or other brand
name portions should be prepared in
the 1 or 2 cup filter as recommended
by the coffee producer.
User's manual
is