Decalcifying - SOLIS CREMA SL 90 Mode D'emploi

SOLIS CREMA SL 90
If the brewing filter becomes very stai-
ned, remove it with a screwdriver and
brush both sides thoroughly.
Filter inserts: Rinse the 1 and 2 cup
filter inserts from time to time to keep
them clean. To do so, place the filter
holder with empty filter inserts in the
SOLIS Crema, position a cup under the
filter holder and switch on the pump
until the cup is full. Switch off the
pump. The rinsing operation is now
complete.
Housing: When necessary, the housing
should be cleaned with a damp cloth
and then rubbed dry with a cloth.
IMPORTANT: The appliance must not
be immersed in water. Switch off the
appliance and remove the plug during
all cleaning and care operations.
56

11.0 Decalcifying

Even if a water filter is used, the appli-
ance should be decalcified regularly in
accordance with the hardness of your
local water and, in any event, at least
every four to six months.
11.1 For decalcification, it is best
to use SOLIPOL, a product specially
designed for this purpose.
11.2 With the appliance switched
off, fill the water container in proporti-
ons of one part water and one part
SOLIPOL (0.5 litres of water and 0,5
litres of SOLIPOL).
11.3 Turn on the hot water/steam
rotary switch and place a container
under the steam jet. Now, turn the
main switch ON and let water run from
the jet for about 1 minute.
User's manual