M-Audio M-Track Guide D'utilisation page 5

Mac
1. Use the included USB cable to connect the M-Track to your computer.
2. Go to System Preferences
3. Under the Output tab, select M-Track as your default device.
4. Under the Input tab, select M-Track as your default device.
5. Close the window.
Features
8
6
1. USB PORT – Use the included cable to connect the M-Track to a computer. M-Track
requires a USB 1.1 (or higher) connection.
2. MAIN OUT – Use standard 1/4" cables to connect this output to a pair of powered
speakers. The level of this output is controlled by the MAIN LEVEL knob.
3. MAIN LEVEL – Adjusts the output volume of the MAIN OUT so you can control the
listening level of your connected powered monitors.
4. MIDI IN – Use a standard five-pin MIDI cable to connect this input to the MIDI OUT of an
external MIDI device.
5. MIDI OUT – Use a standard five-pin MIDI cable to connect this output to the MIDI IN of an
external MIDI device.
6. PHANTOM POWER LED – Lights up when phantom power is engaged.
7. MIDI OUT LED – Flashes when MIDI data is sent from your software to M-Track's MIDI
OUT.
8. MIDI IN LED – Flashes whenever MIDI data is received from an external MIDI controller.
9. USB LED – Illuminates when a valid USB connection has been established between your
computer and M-Track. Use this light to verify that M-Track is receiving power and is ready
to use.
10. LED METERS – Indicates the audio level of the MAIN OUT.
Sound.
1 10 2
5
4 5
9
7
3