Bar And Chain Combinations; Ec-Declaration Of Conformity - Husqvarna 235e Manuel D'utilisation

Bar and chain combinations

The following combinations are CE approved.
Length, inch Pitch, inch
13 0,325
15 0,325
16 0,325
18 0,325
H30
3/16" /4,8

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws Husqvarna 235 and 240 from 2007's serial numbers and onwards (the year is clearly stated in plain text on the type
plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:2001, EN ISO 11681-1:2004
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out
EC type examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificate for EC
type examination in accordance with annex VI, has the number: 404/07/1189.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The certificates have the numbers: 26/161/001 - 240, 26/161/002 - 235.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna October 23, 2007
Bengt Frögelius, Development director chainsaw R&D
5451676-47 Rev. 4 2008-08-08
TECHNICAL DATA
Bar
Gauge, mm
1,3
60° 30°
Max. nose radius Type
10T
10T
Husqvarna H30
10T
10T
0,025"/0,65
10°
Chain
Length, drive
links (no.)
56
64
66
72
English – 23