Bosch Professional GSS 140 A Notice Originale page 11

Always wait until the power tool has come to a com-
u
plete stop before placing it down.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Complete dust box (Microfilter system)
(2) Sanding plate
(3) Clamp
A)
(4) Sanding sheet
(5) Release button for front clamping bracket
(6) Front clamping bracket
(7) On/off switch
(8) Handle (insulated gripping surface)
(9) Extraction outlet
(10) Locking lever for dust box
(11) Filter element (Microfilter system)
A)
(12) Dust extraction adapter
A)
(13) Dust extraction hose
A)
(14) Punch
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Orbital sander
Article number
Rated power input
Bosch Power Tools
Orbital sander
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
– Hook-and-loop backing
– Clamping tension
Sanding plate dimensions
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 82 dB(A); sound power level
93 dB(A). Uncertainty K=3 dB.
Wear hearing protection
Total vibration values a
determined according to EN 62841-2-4: a
K=2.0 m/s
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
A)
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
GSS 140 A
3 601 B97 0..
W 180
rpm
rpm
mm
mm
mm
mm
kg
(triax vector sum) and uncertainty K
h
h
2
.
1 609 92A 4JB | (19.07.2018)
English | 11
GSS 140 A
12000
24000
1.6
115 × 107
115 × 140
113 × 105
1.4
/ II
2
= 6.5 m/s ,