EWT WOODAIRF Manuel D'utilisation page 9

Masquer les pouces Voir aussi pour WOODAIRF:

Manuel d'utilisation (17 pages)

page de 16

/ 16
Signets

Les langues disponibles

sition.

SPECIFICATIONS

can be

Model

Power

other

Number of speeds

Oscillation

than

Tilt adjustment

Oscillation switch

aning

Number of blades

Blade material

Grill material

Do not

Grill diameter

liance

Removeable grill

Handle

d the

Voltage

Frequency

gularly

Product dimensions (LxDxH)

Product weight

re not

BEFORE FIRST USE

ective

1. Please read these instructions carefully before using the

appliance and keep them in case of future use.

ve fan

2. Make sure that the voltage of your local electricity network

th the

corresponds to the one which appears on the appliance.

3. Before using it for the first time, remove the appliance's

protective tabs and stickers.

rd for

ASSEMBLY

alls or

Unpack your appliance and carefully remove the packaging

w may

around the fan.

STEP1 :

Place the base (12) on a flat floor then take the parts for

assembling the stand (9-11). Remove the fixing screw for the

stand (13) which is on fan support stand (11). Then insert the

fan support stand in the hole of the latch (12) and tighten the

standing fixing screw (13) firmly at the bottom of the latch.

STEP 2 :

Unscrew the blade centre cap (2) and the back grill safety

screw (4) connect to the motor shaft (6). Then firmly attach

the back grill (5) to the motor housing (9), making sure that

the fan handle is pointing upwards. Replace and firmly

tighten the back grill safety nut (4).

STEP 3:

Place the blades (3) onto the motor shaft (6), replace the

blade centre cap (2) and tighten firmly.

STEP 4:

Attach the front grill (1) to the back grill (5), use the fixing

clip to fix it together and tighten the safety screw (14) firmly.

For safety reasons, before switching the appliance on,

ensure that the grill has been firmly attached and that the

safety screw (14) is well fixed.

.com

www.ewt-france.com

Woodair_F.indd 9

INSTRUCTIONS FOR USE

WOODAIRF

1. Plug the appliance into mains socket (220-240V, 50Hz)

45W

using the electrical cable (10).

2. Activate the fan by turning the speed control button (7)

Yes: automatic

and selecting the air speed required: "1" indicates SLOW

Yes: manual

speed, "2" indicates MEDIUM speed, "3" indicates HIGH

Yes

speed and "0" indicates that the fan is switched off.

3. Press the oscillation button (8) to activate oscillation

Metal

of the fan and pull on the oscillation button (8) to stop

Metal

oscillation and keep the fan in a fixed position.

30cm

4. To set the air flow upwards or downwards, set the fan to

Yes: easy to clean

a central position then raise or lower the motor housing

Yes

(9) in the required direction.

220-240V~

50HZ

L35 x D29 x H46

CLEANING AND MAINTENANCE

3.2kg

•

Always unplug the appliance before cleaning it.

•

Clean the surface of the appliance using a soft cloth, do

not use any water.

•

If the appliance is very dirty, clean the surface using a

damp cloth (add a non-corrosive cleaning product if

required.

•

Do not use corrosive detergents, corrosive solvents or

chemical products.

•

Do not use an abrasive sponge, scouring pad or hard

brush to clean the appliance.

•

Do not immerse the main body of the appliance into

water.

•

Ensure that the motor and the other electrical

components do not come into contact with water.

•

If the appliance is not to be used for a long period, pack it

away carefully. Store it in a dry and ventilated area where

it will not be affected by dust.

•