Installing The Sigma Rox 8.1 And Its Accessories; Installing The Bracket; Installing The Transmitters - Speed And Cadence; Installing The Magnets - Speed And Cadence - Sigma ROX 8.1 Mode D'emploi

1 pREFAcE AnD cOnTEnTS OF pAckAGE
1.2 cOnTEnTS OF pAckAGE
k Bracket

2 InSTAllInG ThE SIGMA ROX 8.1 AnD ITS AccESSORIES

Illustrations regarding to these assembly notes can be found in the enclosed folded sheets!

2.1 InSTAllInG ThE BRAckET

k Handlebars or front end
k Remove yellow film
2.2 InSTAllInG ThE TRAnSMITTERS – SpEED AnD cADEncE
k Both transmitters can be fitted with cable ties (permanent attachment)
or with the O-rings.
k To obtain the required gap of 12 mm or less, place the transmitter and magnet
closer to the hub.
2.3 InSTAllInG ThE MAGnETS – SpEED AnD cADEncE

2.4 InSTAllInG ThE SIGMA ROX 8.1 TO ThE BRAckET

k Attachment
fittings
ROX 8.1
2 3 4 5
6 7 8 9
10 11 12 13
14 15 16
17 18 19
20
39