Function Setup; Set The Language; Set The Contrast; Set Year, Date And Time - TIPTEL 160 Manuel D'utilisation

Function setup

Every function setup is available by using just a single key. In on-hook status, press
X/MENU for a minimum of 3 seconds to enter the function menu. Pressing the very
same key X/MENU repeatedly will show the different functions available one after
another. Please, refer to the list below for setting up each function. You may escape
the setting menu going off-hook for a second.

Set the Language

In on-hook status, press and hold X/MENU for 3 seconds to enter LANGUAGE
SETUP. Press

Set the Contrast

After set up the LANGUAGE, press X/MENU to access LCD CONTRAST setup.
LCD will display SETTING CONTRAST (The default setting is 3.) Press
select the contrast (1-5). Press X/MENU to confirm.

Set Year, Date and Time

After set up the LCD CONTRAST, press X/MENU to access the YEAR, DATE and
TIME setup. The digits of the year will flash. Press
Press X/MENU to confirm. Then digits of the month will flash. Press
select the month and press X/MENU to confirm. Use the same method to set up
the date and time (maybe set automatically by the network operator or PABX).

Set Ext. No. (CO-line access)

After set up the YEAR, DATE & TIME, press X/MENU to access EXT. NO. setup.
The first digit will flash. Press
save selection. Use the same method to continue setting other digits.
When the phone is operated behind a PBX, Ext. No. can be set for dialing outside
phone numbers and a pause will be added automatically between the Ext. No. and
the phone number you dialed. E.g.: If you set up the Ext. No. as 0 and dial from the
phone book, the number stored as 0021024280 will be practically dialed as 0,
pause, 021024280 (see: Set Pause Time).
Setup
to select the language. Press X/MENU to confirm.
to select the digit and press X/MENU to
11
to select the year.
to
to
e
n
g