ETNA SM120RVS Mode D'emploi page 87

OPERATION
Programme set in advance
Auto menu
3. Turn the control knob until '20:00' appears in the display.
4. Press button again.
In the display 'P 100' will blink.
5. Turn the control knob until 'P 80' appears in the display.
6. Press button again to confi rm the setting.
Th e power is set to 'P 80'.
7. Turn the control knob until '5:00' appears in the display.
8. Press the start button
to cancel the setting.
1. Set the clock fi rst (see page 10).
2. Input the cooking programme. Th ree stages can be set at most.
Defrosting should always be set as the fi rst stage, if it is included
in the multi-level programme.
Attention: do NOT press the start button
cooking programme.
3. Press button .
In the display the hour fi gure will fl ash.
4. Turn the control knob to set the hours.
5. Press button again.
In the display the minute fi gure will fl ash.
6. Turn the control knob to set the minutes.
7. Press the start button
If the door is closed and the programmed time arrives, the buzzer will
ring twice and the cooking will start automatically.
1. Press button
In the display 'A - 1' will blink.
2. Turn the control knob to choose an automatic programme (A - 1
until A - 8).
3. Press button
4. Turn the control knob to set the weight.
Th e display shows the weight in grammes and a 'g'.
5. Press the start button
to cancel the setting.
EN 15
to start cooking or press button
to confi rm the setting.
.
to confi rm the setting.
to start cooking or press button
Cooking
after setting the