Ferroli T 18 Manuel D'installation, D'utilisation Et D'entretien page 35

1.4 Technical description
The stove works exclusively on pellets and enables easy installation with the heating system. The stove's automatic
control systems guarantee optimum heat output and complete combustion; there are also safety systems to
guarantee safe operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model T 18 with nominal power of 19 kW ensures a maximum heatable volume of 495 m3, considering
the coefficient of a building's energy requirements equal to 35W/m3, and may vary depending on the insulation, type
and climatic zone which are important variables for the correct choice of unit. For technical data, refer to the table on
page 8.
T 18 pellet heating stove dimensions
Key:
A - Power cable connection
B - Combustion air inlet
C - Overpressure water discharge (1/2" female - 3 bar)
D - Water system connection
E - System return (1" male )
F - System delivery (1" male )
G - Fume exhaust pipe connection D 80 mm
H - Control panel model F047
I - Pellet hopper door
L - Adjustable feet
M - Turbulator shaker handle
35 T 18