Regulations; Technical Data; Eu Declaration Of Conformity - stayer RO5 BRUSHLESS Instructions D'emploi

6. Regulations

6.1 Technical Data

Noise emission values measured in accordance with the
relevant standard. (K = 3)
Sound pressure level LpA 81 dB (A).
LWA Sound power level 90 dB (A).
Use ear protection if the sound pressure exceeds 85
dB (A).
= Rated power input
= Load speed
= Orbit
= Disc Diameter
= Weight
= Class II - The machine is double insulated
L = Sound power level
WA
L = Sound pressurelevel
PA
= Vibration
The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V - 60Hz. For lower voltage and models
for specific countries, these values can vary.Please observe
the article number on the type plata of your machine.The
tradenamesoftheindividualmachines may vary.
Noise Vibration lnformation
Noise determined according to EN 60745.
The typical sound pressure level of appliance determined
with a filter A product are: Sound pressure level 81 dB (A)
sound power level 90 dB (A). Tolerance K = 3 dB.
Wear hearing protection!
Total vibration Ah values (vector sum of three directions)
and uncertainty K determined according to EN 60745:
ah = 3 m/s , K <1.5 m/s
2 2
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
lt may be used for a preliminaryassessment of exposure.
The declared vibration emission level represents the
ENGLISH
16
main applications of the tool. However if the tool is used
for different applications,with different accessories or
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure leveloverthe
totalworking period.
An estimation of the levelof exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce theexposure leveloverthetotal working period.
ldentify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
accessories,keepthe hands warm,organisationof work pattems.

6.2 EU declaration of conformity

The undersigned:
STAYER IBERICA,S.A.
With address at:
Calle Sierra de Cazorla, 7
Área EmpresarialAndalucra - Sector 1
28320 PINTO (MADRID)
Tel.:+34 91 691 85 16 Fax:+34 91 691 86 31
CERTIFIES
That the machine:
Type:
We declare under our sole responsibllity that this product
is in confonnity with the following standards or standar-
dized documents: EN 60745, according to regulations
2006/42/CE, 2014/30/EU, 2006/42/CE.
Ramiro de la Fuente
Managing Director
16
ROTOORBITAL SANDER
January, 2019