Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Unplug the machine before any work on it.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
Caution! If the power cord of the appliance gets
damaged, it must be replaced by the manufacturer or
its customer service or a similarly qualified person to
avoid danger.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Do not clean the plastics with solvents, flammable or
toxic fluids. For cleaning, use a damp cloth only.
Apply environment-friendly oil to all moving parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries. If necessary, a list of spare parts can be found
at www.guede.com.
Failure removal
Failures
Not working when pressing the
on-off switch.
Grinding discs do not turn when
tool is switched on.
Device is not running at full speed
or unusual sounds from motor.
Sanding belt flies out.
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be
submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Important information for the customer
Please note that returns within or outside the
warranty period should always be in the original
packaging. This measure effectively avoids
unnecessary transport damage and any associated
disputed ruling. Your equipment is optimally
protected only in the original box, and keeping it
in that box will ensure smooth processing.
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label.
Tel.:
Fax:
E-Mail:
Possible causes
No electricity
On/off switch is defective
Wear on the rubber drive wheels. Increase the contact pressure
Motor is overheating
Motor defective
Band history set incorrectly.
+49 (0) 79 04 / 700-360
+49 (0) 79 04 / 700-51999
support@ts.guede.com
Recommended solution
Check the electricity supply
Have on-off switch replaced by
an approved after-sales service
team.
using the setscrew until the
grinding discs start turning
again.
Turn off device and leave to cool
for 30 minutes.
Contact an approved after-sales
service provider.
Correct until band stays in the
middle.
ENGLISH
25
Publicité
