General; Address; Conventions; Symbols And Labels - Haaga 677 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 63

1. General

This operating manual applies to the haaga 677
sweeping machine (year of manufacture: from
2019), the haaga 697 sweeping machine (year of
manufacture: from 2019) and the haaga 697 plus
sweeping machine (year of manufacture: from
2019) and is only valid for the named machines.
This operating manual provides important
information for the safe and effi cient use of the
machine.
A requirement for safe operation of the machine
is the adherence to all of the safety and operation
instructions provided.
• Read the operating manual carefully before
using the device.
• Read the safety instructions!
• Keep the operating manual safe and
accessible during the lifespan of the device.
• Pass the operating manual onto any
subsequent owner or user of the device.

1.1 Address

Electrostar GmbH
Hans-Zinser-Str. 1-3
73061 Ebersbach/Fils
Germany
Tel.: +49 (0)7163 9988-100
Fax: +49 (0)7163 9988-013
info@starmix.de
www.starmix.de

1.2 Conventions

To be able to work optimally with the operating
manual, please note the following explanations of
the typographical conventions.
Numbering
• The texts shown are fi rst level numbering
points.
Work sequence
1. Step 1 of the work sequence
2. Step 2 of the work sequence
3. Step 3 of the work sequence
The sequence of the work steps must be
observed.
Tip
» Tips and notes (not machine damage) are
shown like this.
haaga 677 / 697 / 697 plus

1.3 Symbols and labels

All warnings and safety instructions must be
complied with! Always take care during operation
in order to avoid accidents, personal injury and
damage to property.
Safety instructions
Risk level

1.4 Limitation of Liability

Electrostar GmbH does not accept any liability for
damage and consequential damage caused by
the following points:
• Failure to observe the operating instructions
• Use of nonapproved replacement parts /
• Unauthorized changes, additions to and

1.5 Warranty

The provisions that are described in the general
terms and conditions of Electrostar GmbH apply.
SIGNAL WORD
Type and source of hazard
Type and source of hazard
Possible consequences
Possible consequences
• Measures for avoiding danger
• Measures for avoiding danger
Risk level
Probability
of occurrence
Direct
DANGER
Possible
WARNING
CAUTION
Possible
Possible
NOTE
wrong spare parts / spare parts that do not
correspond to the manufacturer's specifi cation
modifi cations to the device
General
EN
Consequences
in the event of
noncompliance
Death, serious injury
Death, serious injury
Slight injury
material damage
35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Haaga 697Haaga 697 plus

Table des Matières