Assembly; Height Adjustment Of The Feet; Cleaning | Maintenance; Technical Data - DeVilbiss Healthcare Drive DELPHI Mode D'emploi

Assembly

The shower stool is pre-
assembled; only the 4 ad-
justable feet need to be
assembled (pic. 1-3).
2

Height adjustment of the feet

Before using the product,
adjust it to the desired
height (pic. 4). To adjust
the height of the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the but-
ton clicks into place in the
desired position (2). En-
sure that the pushbutton
has correctly clicked into
place.
Ensure that all four legs are adjusted to the same height.
Drive Medical GmbH & Co. KG | As per: 16.06.2020 | Errors and alterations excepted
1
3
4

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.

Technical data

Product
DELPHI
DELPHI PLUS
DELPHI 2 PLUS
Product s
DELPHI / DELPHI PLUS / DELPHI 2 PLUS
Overall width
Overall length
Overall height
Seat height
Diameter of seat surface
Total weight
Load max.
Material feet
Clip closure material
Material seat section
EN
Article number
540100000
540200000
540300000
48 cm
48 cm
55 cm
45 - 55 cm
38 cm
1,6 kg
180 kg
Aluminium pipe
Brass
Kunststoff (PP)
9
Instructions for use DELPHI