Assembly - Supplito; Assembly - Supplito Twintop; Adjusting The Tilt Angle; Height Adjustment Of The Table Top - DeVilbiss Healthcare drive SUPPLITO Mode D'emploi

Assembly – SuppliTo
Secure both bases with casters (5) with the L bar (4). En-
sure that the feet are mounted at the correctly marked
sites (A to A, B to B, C to C and D to D).
Push the table top support (2) into the vertical part of the
L bar (4).
Mount the black star screw (3) in the threaded hole pro-
vided and tighten the star screw for height adjustment.
Push the table top with connecting tube (1) horizontally
onto the table top support (2) and tighten using the star
screw (3).
Assembly – SuppliTo twinTop
The service and side table SuppliTo twinTop is delivered
already partially assembled.
You only need to connect the twinTop table top (1) to the
base frame (2) and secure with the star screw.

Adjusting the tilt angle

SuppliTo
To change the tilt angle, loosen the star screw with one
hand by rotating counterclockwise and with your other
hand, adjust the tilt angle as desired. Then tighten the
star screw once again by rotating it clockwise.
SuppliTo twinTop
To change the tilt angle, release the adjustment lever
with one hand and adjust the tilt angle with your other
hand. The tilt angle can be adjusted in 7 different posi-
tions.

Height adjustment of the table top

SuppliTo
The height of the table top can be continuously adjusted
between 72 and 116 cm. To adjust the height, loosen the
star screw by rotating it counterclockwise.
Pull the central bar upwards or downwards to the desired
height and secure this position by rotating the star screw
clockwise.
Drive Medical GmbH & Co. KG | As per: 16.06.2020 | Errors and alterations excepted
SuppliTo twinTop
The height of the table top can be adjusted in 10 posi-
tions between 71 and 93 cm. To adjust the height, loosen
the star screw by rotating it counterclockwise.
Pull the fixation lever out and adjust the table top to the
desired height. Now allow the fixation lever to click into
place in the set position. In addition, secure this position
by tightening the startscrew clockwise.

Securing the standing position

Secure the service and side table by using your foot to
secure the braking casters by pressing down on the bra-
ke.

Cleaning | Maintenance

The service and side table can be cleaned and disin-
fected manually. To do so, use a household cleaner and
a damp cloth. For disinfection, use a disinfectant listed
by the German Society for Hygiene and Microbiology
(DGHM)/Association for Applied Hygiene (VAH).
The service and side table does not require any special
maintenance.

Technical data

Product SuppliTo
Article number 860000001
HMV (medical aids
50.45.04.0025
register) no.
Length of table top 60 cm
Width of table top 40 cm
Overall
62x40x72-116 cm
dimensions
Tilt angle 0-90° continuous
Height adjustment 72-116 cm
Steel frame, wood
Material table top (plastic-
coated)
Maximum central
load on the table 10 kg
top
EN
SuppliTo twin-
Top
860000002
50.45.04.0024
60 cm and 40 cm
40 cm and 20 cm
82x40x71-93 cm
0-55° in 7
positions
71-93 cm
Steel frame, wood
table top (plastic-
coated)
10 kg
9
Instructions for use SuppliTo