Engine Running Behavior; Storing The Machine - Stihl FS 510 C Notice D'emploi

Use resistor type spark plugs with a
N
properly tightened adapter nut.
Installing the Spark Plug
Screw the spark plug into the
N
cylinder.
Press the spark plug boot firmly
N
onto the spark plug.
Fit the cap (1) on the shroud from
N
the rear and push the lug (2) into the
opening (3) in the shroud at the
same time.
Swing the cap forwards onto the
N
shroud, insert and tighten down the
screw (4) firmly.
FS 510 C, FS 560 C

Engine Running Behavior

If engine running behavior is still
unsatisfactory after servicing the air filter
and adjusting the throttle cable, the
cause may be the muffler.
Have the muffler checked by a servicing
dealer for contamination
(carbonization).
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
3
2

Storing the Machine

If the machine is to remain out of use for
approx. 3 months or more
Drain and clean the fuel tank in a
N
well ventilated place
Dispose of fuel in accordance with
N
the regulations and having regard
for the environment
Run the engine until the carburetor
N
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
Remove, clean and inspect the
N
cutting attachment. Treat metal
cutting attachments with protective
oil.
Thoroughly clean the machine
N
Store the machine in a dry and safe
N
place, out of the reach of children
and other unauthorized users
English
39