Alarm Setting - Roadstar CLR-2615 Manuel D'instructions

Masquer les pouces Voir aussi pour CLR-2615:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
CLOCK AND DATE SETTING
In stand-by mode:
1.
Press and hold the [MEM] button (1) until the hour will flash;
2.
Press the [TIME -/+] buttons (2/3) to adjust the hour;
3.
Confirm with the [MEM] button (1);
4.
Press the [TIME -/+] buttons (2/3) to adjust the minutes;
5.
Confirm with the [MEM] button (1);
6.
Press the [TIME -/+] buttons (2/3) to choose 12 or 24 hour format;
7.
Confirm with the [MEM] button (1);
8.
Repeat steps 2 and 3 to set the date.

ALARM SETTING

In stand-by mode:
1.
Press and hold the [POWER] button (7) to enter into the Alarm setting.
2.
Press the [TIME -/+] buttons (2/3) to adjust the hour;
3.
Confirm with the [POWER] button (7);
4.
Press the [TIME -/+] buttons (2/3) to adjust the minutes;
5.
Confirm with the [POWER] button (7);
6.
Press the [TIME -/+] buttons (2/3) to set the days as follow:
1-5 (Monday to Friday);
1-7 (Whole week);
6-7 (Weekend);
1-1 (One day of the week).
7.
Confirm with the [POWER] button (7);
8.
Repeat steps 2 to 7 to set the 2nd alarm.
ACTIVATE / DEACTIVATE ALARM SETTINGS:
in stand-by mode, press repeatedly the [ALARM 1 or 2] buttons (5/6) to select alarm
mode (Buzzer / Radio / OFF) (When the alarm is ON, the "●" indicator will light up on
the right side of the display).
ALARM OFF:
During Alarm on, press [POWER] button (7) to deactivate the alarm sound (the Alarm
setting remains) or press [SNOOZE] button (4) to postpone the alarm for 8 min.
TO USE THE RADIO
1.
Press the [POWER] button (7) to power ON the unit;
2.
Adjust radio frequency to your desired station by pressing the [TUNING +/-] but-
tons (2/3). (If you hold tuning button it will scan until it finds the next station);
3.
Adjust the volume with the [VOLUME +/-] (5/6);
4.
To switch off the radio, press and hold the [POWER] button (7).
Note: For a better reception reorient the antenna (13).
PRESETS
1.
Tune the desired station as explained above;
2.
Press and hold [MEM] button (1) until "P" will flash;
3.
Press the [TUNING +/-] buttons (2/3) to choose the number;
4.
Press the [MEM] button (1) to save the radio station.
RECALL A PRESET STATION:
English
2

Publicité

Table des Matières
loading

Table des Matières