Safety Instructions - Becker Centronic SensorControl SC911 Notice De Montage Et D'utilisation

General information
• Please keep the instruction manual safe!
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
Caution
•
Risk of injury due to electric shock.
•
Connections to the 230 V mains must always be per-
formed by an authorised specialist.
•
Disconnect the connecting cable from the power prior to
installation.
• Keep people out of the system's range of travel.
• If the system is controlled by one or more transmitters,
the system's range of travel must always be visible during
operation.
•
When connecting the control cables (protected extra-low
voltages), only use cables with sufficient electrical
strength.
•
Observe the specifications for the sun protection system.
16 - en

Safety instructions