Safety Information; Intended Use - Becker Centronic SensorControl SC861 Notice De Montage Et D'utilisation

Caution
Please keep the instructions in a safe place!
• Use unmodified Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.
• Please refer to the specifications given in the operating instructions
for the sun protection system
The SC861 is designed for operation of sun protection systems only, which are
not being used in applications requiring privacy. If the SC861 is used for any
purpose other than that stated above, this shall be regarded as non-designated
use.
• Please note that radio sets cannot be operated in areas with increased risk of
interference (e. g. hospitals, airports).
• The remote control is only permitted for equipment and systems with which
a malfunction in the hand-held transmitter or receiver does not present a risk
to persons, animals or objects, or this risk is covered by other safety devices.
• The operator does not enjoy any protection from disturbances by other re-
mote signalling equipment and terminal equipment (for example, also by
radio sets operated in the same frequency range in accordance with regula-
tions).
Note
Ensure that the controls are not installed and operated in the vicinity of
metal surfaces or magnetic fields.
Radio sets transmitting at the same frequency could interfere with re-
ception.
It should be noted that the range of the radio signal is restricted by leg-
islation and constructional measures.
Safety Information
Intended use
de
en
fr
nl
11