Cola ENERGYCA 30 Manuel D'installation, D'utilisation Et D'entretien page 42

ENERGYCA 30 – ENERGYCA 30S pellet heating stove fire door opening – closing
Fire door opening-closing
handle;
- Opening: anticlockwise
- Closing: clockwise
1.5 Permissible use and fuel
The pellet stoves work exclusively on pellets in different types of wood complying with Standard DIN plus 51731 or
UNI EN 17225-2 or Ö-Norm M 7135 or having the following characteristics:
Heat value:
Density:
Moisture:
Diameter:
Ash percentage
Length:
Composition:
Packing :
The pellet hopper is at the back of the stove.
The door is located in the top part and loading occurs manually with the stove on or off, making sure not to overfill
and operate in complete safety.
The use of pellets with characteristics different from those tested by the technician during first lighting involves a new
setting of the boiler pellet loading parameters; this operation is not covered by the warranty.
Store the pellets in a dry place.
For reasons of regular and efficient operation, pellets or other fuels cannot be manually loaded in
the brazier.
Do not load non-conforming fuels in the hopper.
Do not load foreign bodies such as containers, boxes, bags, metals, etc., in the hopper.
The use of poor quality and non-conforming pellets damages and compromises stove
operation, invalidating the warranty with the exclusion of liability of the manufacturer.
1.6 Accessories supplied
The supply includes:
Electrical power cable;
Installation, use and maintenance manual;
Opening - closing key;
Remote Control.
min. 4.8 kWh/kg (4180 kcal/kg)
680-720 kg
max. 10% weight
6 +0.5 m
max. 1.5% weight
min. 6 mm- max. 30 mm
100% untreated wood from the wood industry or post consumer without added binding
substances or bark, complying with current regulations
in bags made from environmentally friendly or biodegradable material or paper
To open the door, fit the handle
supplied and turn it clockwise
42