Télécharger Imprimer la page

Makita DVC665 Mode D'emploi page 8

Publicité

Les langues disponibles

Les langues disponibles

Indicator lamps
Lighted
Off
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Switch box position
The switch box can be hooked on either side of the
lower belt. Arrange the cord so that the switch box
comes to your desired side. To prevent the cord from
being damaged, pass the cord through the groove as
illustrated.
1
2
► 1. Groove 2. Cord
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
1
2
Adjusting belts
The tightness of the shoulder belts, upper and lower
belts can be adjusted. Put your arms through the shoul-
der belts first then fasten the lower and upper belts.
To tighten, pull the end of the strap as illustrated. To
loosen, pull up the end of the fastener.
Lower belt
1
► 1. Strap 2. Fastener
Shoulder belts
► 1. Strap 2. Fastener
Upper belt
► 1. Strap 2. Fastener
8 ENGLISH
2
1
2
1
2

Publicité

loading