Digi-Trac™ Control System - Titan IMPACT 1640 Mode D'emploi

IMPACT 1640
4.8
DIGI-TRAC™ CONTROL SYSTEM
The Digi-Trac Control System increases the
i
functionality of the sprayer. It is installed directly
below the pressure control knob on the control
panel. It consists of a display and four function
keys. The display shows various menu screens
that allow the user to customize and monitor
sprayer operation using the function keys.
SET PSI
Display
ACTUAL PSI
Function
Keys
The pressure control knob overrides the Digi-Trac.
i
Anytime the pressure control knob is turned, the
sprayer pressure will change accordingly.
FUNCTION KEYS
The function keys are numbered 1–4. Each key is labeled with
an additional function as well.
#1/Menu Key Pressing the #1 key scrolls through the
available menu screens or performs a
function described on the active menu
screen.
#2/p Key Pressing the #2 key performs a function
described on the active menu screen or
increases a value.
#3/q Key
Pressing the #3 key performs a function
described on the active menu screen or
decrease a value.
#4/Select Key
Pressing the #4 key selects the active
menu screen or performs a function
described on the active menu screen.
MENU SCREENS
Several menu screens are available for the user to customize
and monitor sprayer operation. They include Main Screen,
Volume Pumped, Job Volume, Unit Serial #, Timers, Job Timers,
Service Time, Security Code, Prime, and Rapid Clean.
MAIN SCREEN
The Main Screen is the default screen
for the control system at sprayer
startup. Pressing the #2 key switches
between PSI, BAR and MPa units of
measure. Press the #1 key to scroll through the remaining
menu screens.
VOLUME PUMPED SCREEN
The Volume Pumped screen shows
the total number of gallons or liters
3000
sprayed by the sprayer.
2950
To select the Volume Pumped
screen, press the #4 key.
JOB VOLUME SCREEN
The Job Volume screen allows the
user to reset a liter counter to track
usage on specific jobs.
To select the Job Volume screen,
press the #4 key.
UNIT SERIAL # SCREEN
The Unit Serial # screen shows the
sprayers serial number.
To select the Unit Serial # screen,
press the #4 key.
TIMERS SCREEN
The Timers screen shows the total
time the sprayer has been turned on
as well as the total time the sprayer
has been running (pumping).
To select the Timers screen, press
the #4 key.
JOB TIMERS SCREEN
The Job Timers screen allows the
user to reset the "ON TIME" and "RUN
TIME" to track time on specific jobs.
To select the Job Timers screen,
press the #4 key. "JOB ON" screen
will appear. Press #3 to reset. Press
#1 to continue to "JOB RUN" screen.
Press #3 to reset. Press #1 to scroll through the remaining
menu screens.
OPERATION
SET PSI 3000
ACTUAL PSI 2950
VOLUME PUMPED
MENU-1 SELECT-4
GALLONS X
MENU-1
JOB VOLUME
MENU-1 SELECT-4
JOB GAL XXXX
MENU-1 RESET-3
UNIT SERIAL #
MENU-1 SELECT-4
SER # XXXXXXXXXX
MENU-1
TIMERS
MENU-1 SELECT-4
ON TIME XXXX
RUN TIME XXXX
JOB TIMERS
MENU-1 SELECT-4
JOB ON X
MENU-1 RESET-3
JOB RUN X
MENU-1 RESET-3
15