Alarm Function - Gaggenau RW 414 Notice D'utilisation

Masquer les pouces Voir aussi pour RW 414:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Vacation mode
If absent for a prolonged period, you can switch the
appliance to energy-saving vacation mode.
When vacation mode is switched on:
both climatic zones are set to a temperature
of 52 °F,
the humidity function is switched off,
the light is switched off.
Switching on
Press Holiday button ¶.
VACATION is displayed in the display panel.
Switching off
Press Holiday button ¶.
The previous settings and temperature values are
once again activated.
Rest mode
When Rest mode is switched on, the following
settings are switched off:
Acoustic signal
Interior light
Messages on the display panel
The background illumination of the display panel
is reduced
Buttons are locked
Switching on
Press and hold down the setting button @.
1.
Press Holiday button ¶.
2.
Press setting button @ and hold down for
3.
a further 3 seconds.
The VACATION symbol flashes on the display
panel and RESTMODE is displayed.
Switching off
Press Holiday button ¶.
The previous settings and temperature values are
once again activated.
10
Humidity function
The air humidity in both climatic zones can be
increased independently of each other.
Switching on
Press setup button μ.
1.
Press selection button ¿ until HUMIDITY and
2.
the current setting (ON/OFF) are displayed for
the particular climatic zone.
Press the setting button @, in order to change
3.
the setting.
Press the setup button μ, in order to store
4.
the setting.
HUMIDITY is displayed in the display panel.
Switching off
Press setup button μ.
1.
Press selection button ¿ until HUMIDITY and
2.
the current setting (ON/OFF) are displayed for
the particular climatic zone.
Press the setting button A, in order to change
3.
the setting.
Press the setup button μ, in order to store
4.
the setting.
HUMIDITY goes out on the display panel.

Alarm function

Switching off the warning signal
Press the alarm button ± to switch off the warning
signal.
Door alarm
The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rw 464

Table des Matières