Whirlpool WEG750H0H Instructions Pour L'installation page 12

4. Remove cooktop burner caps and bases from package
containing parts. Place the burner bases as indicated by the
following illustration for your model:
For Models WEG750H0H and WEGA25H0H:
A
B
A. Small
B. X-Large
5. Align the gas tube opening in the burner base with the orifice
holder on the cooktop and the igniter electrode with the
notch in the burner base.
E
A. Burner cap
B. Gas tube opening
C. Burner base
12
D
C
E
C. Oval D. Medium
E. Large
A
B
C
D
D. Igniter electrode
E. Orifice holder
6. Place the burner caps on the appropriate burner bases.
IMPORTANT: The bottom of the small and medium caps are
different. Do not put the wrong size burner cap on the burner
base.
SR
AUX
Small cap Medium cap
Burner caps should be level when properly positioned. If burner
caps are not properly positioned, surface burners will not
light. The burner cap should not rock or wobble when properly
aligned.
A. Incorrect
B. Correct
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7. Plug into a grounded 3 prong outlet.
UR
Wok cap X-Large cap
A
B