Melitta bar-cube mc Mode D'emploi page 30

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Now you can refill fresh milk into the milk container.
As soon as product dispensing is shown again in
the display of the coffee machine ...
Insert the milk suction hose again into the
container filled with milk and put it again into the
cooling chamber.
Switch on the device again and close the device
door.
b) Defrosting the refrigerator
The refrigerator must be defrosted if an ice layer more
than 3 mm thick has formed or when you
GB
decommission the device:
Open the device door and ...
switch off the refrigerator.
Leave the door open to allow warmth to enter it
defrosting the ice layer. Pick up the melted water
with a soft cloth and then clean the cooling
chamber with a cleaning solution as described
at a).
Leave the door of the device open if you do not
assume operation of the device right away. The
circulating air thereby prevents the formation of odors
and mold in the milk area.
Never attempt to break the ice layer loose with
hard or pointed objects. The surface of the
cooling chamber could be damaged in the process.
10
Warning!

Publicité

Table des Matières
loading

Table des Matières