Makita DVC865L Manuel D'instructions page 10

Installing the polyethylene bag
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
tank without letting your hands dirty.
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
► 1. Holder plate 2. Polyethylene bag
Spread the bag around the top of the tank so that the
cloth filter / prefilter edge can catch and hold the bag
securely.
1
► 1. Cloth filter / prefilter
NOTE: A polyethylene bag available on the
market can be used. 0.04 mm or thicker one is
recommended.
NOTE: Too much dust will tear the bag easily, so
do not collect the dust more than the half of the bag
capacity.
Emptying the polyethylene bag
WARNING:
is switched off and the battery cartridge is removed
before emptying the polyethylene bag. Failure to do so
may cause an electric shock and serious personal injury.
CAUTION:
float cage and tank. Applying a great impact may
cause deformation and damage to the parts.
CAUTION:
1
although this depends on picked-up dust volume in the tank.
Or, the suction force will weaken and the motor may be broken.
CAUTION:
the tank. Grabbing the hook may cause the hook to break.
Unhook and lift up the tank cover.
Shake off the dust from the cloth filter / prefilter and then
take the polyethylene bag out of the tank.
2
NOTE: Take the polyethylene bag carefully out of the
tank so that the polyethylene bag cannot be caught
and torn by the protrusion inside the tank when emp-
tying it.
NOTE: Empty the polyethylene bag before it
becomes full. Too much dust in the tank may cause
the polyethylene bag to be torn.
Installing the tool box
1. Release the lock of the battery cover, and open
the battery cover.
2. Set the rails on the tool box along the grooves on
the housing.
3.
Close the battery cover and apply the lock.
10 ENGLISH
Always make sure that the cleaner
Do not apply a great impact on the
Empty the tank at least once a day
Do not grab the hook when emptying