SELECT THE TEMPERATURE SCALE
OPERATING FROM THE CST (Cool Surround
Tecnology) REMOTE CONTROL
The CST remote controller is based on Bluetooth® Low Energy
communication with the Pinguino.
INSERTING OR REPLACING THE BATTERIES
•
Remove the cover on the rear of the remote control.
•
Insert or replace the batteries with two new LR6 "AA" 1.5V
batteries, inserting them correctly (see the instructions in-
side the battery compartment) (fig. 7).
•
Replace the cover.
If the remote control unit is replaced or discarded, the batter-
ies must be removed and disposed of in accordance with current
legislation as they are harmful to the environment.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable bat-
teries. Do not dispose of batteries in fire. Batteries may explode
or leak. If the remote control is not be used for a certain length of
time, remove the batteries. Use only battery within the expired
date.
The temperature can be dis-
played in °C or °F. To change the
temperature unit of measure
touch both the increase
(C3) or decrease
C4) keys for
about 10 sec.
7
DESCRIPTION OF THE CST REMOTE CONTROL
D5 D6 D7 D8
D9
D2
D1 ON/STAND-BY (on/off) button
D2 MODE button
D3 Decrease button
D4 Increase button
D5 Swing button (flap swing)
D6 ARCTIC WHISPER EXTREME button
D7 Air flow button
D8 Timer button
D9 ECO REAL FEEL button
D10 Indication LED
USING THE CST REMOTE CONTROL
The CST remote control senses temperature and humidity like a
thermostat for a personalized custom cool around you. By keep-
ing the CST remote nearby, it will track humidity and tempera-
ture around you making sure you'll always enjoy your desired
comfort.
•
The remote control must be no more than about 33 ft (10
meters) away from the appliance (fig. 8) (even in non line
of sight). The maximum range may be lower depending
on the environment. It belongs to Bluetooth class 2 device
class.
8
D3 D4
max 33ft~
8
D10
D1