Télécharger Imprimer la page

DeLonghi EX CST Série Mode D'emploi page 13

Masquer les pouces Voir aussi pour EX CST Série:

Publicité

Les langues disponibles

Les langues disponibles

SELF-DIAGNOSIS
The appliance has a self diagnosis system to identify a number of warning/malfunctions.
Error messages are displayed on the appliance display.
IF ... IS SHOWN,
IF ... IS SHOWN,
"Low Temperature"
"High Temperature"
(Frost prevention)
..WHAT SHOULD
..WHAT SHOULD
I DO?
The appliance is The appliance is fitted This message will
fitted with a frost
with an overheating
protection device to
device which in case
avoid excessive for-
of operating condi-
mation of ice. The
tions with excessive
appliance starts up
room temperature
again automatically
for a long period, will
when the defrosting
switch the appliance
process is completed.
to ventilate only. The
appliance will be au-
tomatically restored
as soon as the tem-
perature will be close
to the operating limit
conditions.
TIPS FOR CORRECT USE
To ensure optimal results from your air conditioner, follow these
recommendations:
Close the windows and doors where air conditioner will be
used. When installing the air conditioner semi-permanent-
ly, you should leave a door slightly open (as little as 0,39
inches - 1 cm) to guarantee proper ventilation.
Never use the appliance in very damp rooms (laundries for
example).
Protect the room from direct exposure to the sun by par-
tially closing curtains and/or blinds to make the appliance
much more economical to run.
Never use the appliance outdoors.
Make sure there are no heat sources in the room.
Make sure the air conditioner is standing on a level surface.
Never rest objects of any kind on the air conditioner.
IF ... IS SHOWN,
"Low humidity"
..WHAT SHOULD
I DO?
I DO?
only be displayed
when in Eco Real
Feel function, in-
dicating that the
room
humidity
level is extremely
low. To resume ope-
ration, switch the
unit to any other
mode other than
the Eco Real Feel
function.
IF ... IS SHOWN,
"Probe Failure"
(Probe damaged)
..WHAT SHOULD
I DO?
If this is displayed, Empty the internal If this is displayed,
call customer service safety tank fol-
lowing the instruc-
tions in the section
"End of season
operations"
Never obstruct the air intake or air outlet flap (see fig.
below).
do not cover the appliance
12
IF ... IS SHOWN,
IF ... IS SHOWN,
"High Level"
"Communication
(Internal tray full)
(Internal commu-
nication issue)
..WHAT SHOULD
..WHAT SHOULD
I DO?
call customer ser-
vice
Failure"
I DO?

Publicité

loading