SPIDO JC-800P Mode D'emploi page 13

FEATURES / DETAILS
Suction pipe (included)
1
Pressure line
2
Intake filter (included)
3
Suction port
4
Pressure port
5
Filling opening for water
6
Drain screw for water
7
Non-return valve (included)
8
Shut-off cock
9
Pump housing
10
Carry handle
11
Pump foot
12
Terminal box
13
Power switch
14
Coarse filter
15
HA : Suction head (between the surface of water and the
pump).
HI : Difference between surface of the liquid to be pumped and
entrance of the suction line (min 0,3 m)
Please read through these operating instructions
carefully to make sure that you can fully benefit from
all features. Some explanatory illustrations can be
found at the end of these operating instructions.
We hope you will enjoy your new device!
TABLE OF CONTENTS
1. General safety information
2. Range of use
3. Technical Data
4. Scope of delivery
5. Installation
6. Electrical connection
7. Putting into operation
8. Automation with special accessories
9. Maintenance and troubleshooting
10. Warranty
11. How to order spare parts
12. Service
Annex : Illustrations
GB