Sunrise Medical QUICKIE Q700 M Manuel D'utilisation page 23

Masquer les pouces Voir aussi pour QUICKIE Q700 M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To disconnect the batteries on Front and Rear-wheel drive:
• Release the two handle screws under the mid of the seat frame,
that connect the seat frame with the seat module interface (step
1) and release the lever (step 2) (Fig.6.6.1 - 6.6.2).
• Flip the seat frame backwards (Fig.6.3).
• Ensure the seat is secured with the seat stay in place, before
letting go, (Fig.6.7 Front - Fig.6.8 Rear).
• Lift off the battery box lid, (Fig. 6.4 - B).
• Disconnect the 2 pin Anderson connectors from each battery
(Fig.6.5).
To reconnect the batteries reverse the above procedure.
WARNING:
Removing the batteries can lead to a change of the center point of
gravity. The result may be that the chair flips backwards without
the weight of the batteries. Sunrise advises to:
• Putting an obstacle behind the chair to secure the situation.
This can be a chest, or a chair, or etc.
• Try to lift the battery slightly first to check the effect of taking
out the weight.
Q700 M/F/R Rev.A
Fig. 6.6.1
1
Fig. 6.6.2
Fig. 6.7
Fig. 6.8
FWD
2
RWD
2
1
FWD
RWD
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Quickie q700 fQuickie q700 r

Table des Matières