Unpacking; Shipping Contents - ShopMaster Delta S36-300T2 Guide D'utilisation

Prior to tool assembly and use, read
this manual thoroughly to familiarize
yourself with proper assembly, maintenance and safety
procedures.
Check shipping carton and machine for damage before
unpacking. Carefully remove components in top foam
layer. Remove the top layer of foam then remove all
components in the bottom layer of foam. Lay out all
parts on a piece of cardboard or other clean, flat surface.
Always check for and remove protective shipping

SHIPPING CONTENTS

A. Saw
B. Rip Fence
C. Push Stick
D. Anti-Kickback Pawls
E. Riving Kinfe (preassembled to saw)
F. Blade Guard
G. Throat Plate
A
H
M

UNPACKING

materials around motors and moving parts. Do not discard
shipping carton and packing materials until you have
carefully inspected the contents, assembled the machine
and are satisfied that it operates correctly.
Compare package contents to Shipping Contents List and
Hardware Bag List prior to assembly to make sure all
items are present. Carefully inspect parts to make sure
no damage occurred during shipping. If any parts are
missing, damaged or preassembled, do not assemble.
Instead, call Customer Support at 1-800-223-7278 for
assistance.
H.
I.
J1.
J2.
K.
L.
M.
B C
I
8
Stand Part 1
Stand Part 2
Vertical Feet (B)
Horizontal Feet (A)
Miter Gauge
Blade Wrenches (2)
Outfeed Extension
D E
J1 J2
F G
K L