Unpacking; Shipping Contents - ShopMaster Delta S36-290 T2 Guide D'utilisation

Prior to tool assembly and use, read
this manual thoroughly to familiarize
yourself with proper assembly, maintenance and safety
procedures.
Check shipping carton and machine for damage
before unpacking. Carefully remove components in
top foam layer. Remove the top layer of foam then
remove all components in the bottom layer of foam.
Lay out all parts on a piece of cardboard or other clean,
flat surface. Always check for and remove protective
shipping materials around motors and moving parts.

SHIPPING CONTENTS

A. Saw
B. Rip Fence
C. Push Stick
D. Anti-Kickback Pawls
E. Riving Knife (preassembled to saw)
F. Blade Guard
G. Throat Plate
A

UNPACKING

Do not discard shipping carton and packing materials
until you have carefully inspected the contents,
assembled the machine and are satisfied that it operates
correctly.
Compare package contents to Shipping Contents List and
Hardware Bag List prior to assembly to make sure all items
are present. Carefully inspect parts to make sure no damage
occurred during shipping. If any parts are missing, damaged
or preassembled, do not assemble. Instead, call Customer
Support at 1-800-223-7278 for assistance.
C
B
N
8
K. Miter Gauge
L. Blade Wrenches
N. Fence Rail
D E F G
K L