Unpacking; Shipping Contents - ShopMaster DELTA S36-300 Guide D'utilisation

Prior to tool assembly and use, read
this manual thoroughly to familiarize yourself with proper
assembly, maintenance and safety procedures.
Check shipping carton and machine for damage before
unpacking. Carefully remove components in top foam layer.
Remove the top layer of foam then remove all components
in the bottom layer of foam. Lay out all parts on a piece of
cardboard or other clean, flat surface. Always check for
and remove protective shipping materials around motors
and moving parts. Do not discard shipping carton and

SHIPPING CONTENTS

A. Saw
B. Rip Fence
C. Push Stick
D. Anti-Kickback Pawls
E. Riving Kinfe (preassembled to saw)
F. Blade Guard
G. Throat Plate
A
H
M

UNPACKING

packing materials until you have carefully inspected the
contents, assembled the machine and are satisfied that it
operates correctly.
Compare package contents to Shipping Contents List
and Hardware Bag List prior to assembly to make sure all
items are present. Carefully inspect parts to make sure
no damage occurred during shipping. If any parts are
missing, damaged or preassembled, do not assemble.
Instead, call Customer Support at 1-800-223-7278 for
assistance.
H. Stand Part 1
I. Stand Part 2
J. Stand legs (4)
K. Miter Gauge
L. Blade Wrenches (2)
M. Outfeed Extension
B C
I
8
D E
J K
F G
L