Specific Safety Instructions; Technical Data; Preparations For Use - REMS Power-Press E Instructions D'emploi

eng

Specific Safety Instructions

Use personal safety equipment (e.g. goggles).
•
Avoid unnatural postures, and do not lean too far forward.
•
Before changing the pressing or expanding tools, pull the mains plug or take
•
out the battery!
The drive units develop a very high pressing force. For that reason, be par-
•
ticularly careful. Keep all other persons away from the working area during
working.
Hold the drive units only by the housing grip (6) and the pistol grip (9)
•
during operation. Keep your hands away from moving parts (pressing area,
expanding area)!
Never operate radial presses when the tongs shank (2) is not locked. Risk
•
of fracture!
Always position radial presses with the pressing tongs on the press fitting
•
at right angles to the pipe axis. Never position it askew.
Do not start radial presses without pressing tongs inserted. Do not start the
•
pressing operation except to make a press joint. Unless counter pressure
is applied by the press fitting, the drive unit or pressing tongs will be needlessly
stressed.
Before using pressing tongs from other manufacturers, check that they are
•
suitable for the drive unit. Consult and comply with the pressing tongs
manufacturers' instructions for use.
Only operate axial presses with pressing heads fully inserted. Risk of
•
fracture!
Always position axial presses with the pressing tongs on the compression
•
sleeve fitting at right angles to the pipe axis. Never position it askew.
Screw expanding heads as far as they will go onto the expander.
•
Do not attempt to repair damaged pressing tongs, pressing heads or
•
expanding heads. Risk of fracture!
Consult and comply with the instructions for installation and fitting of the
•
system's manufacturers.

1. Technical Data

1.1. Article numbers
REMS Power-Press E drive unit
REMS Power-Press drive unit
REMS Power-Press ACC drive unit
REMS Mini-Press ACC drive unit
REMS Akku-Press drive unit
REMS Akku-Press ACC drive unit
REMS Ax-Press 15 drive unit
REMS Ax-Press 40 drive unit
REMS Akku-Ex-Press Mini Q & E drive unit
REMS Akku-Ex-Press Q & E drive unit
REMS battery 12 V
REMS voltage supply 230 V
Rapid charger 12–18 V
Sheet steel case, REMS Power-Press E
Sheet steel case, REMS Power-Press
Sheet steel case, REMS Power-Press ACC
Sheet steel case, REMS Mini-Press ACC
Sheet steel case, REMS Akku-Press
Sheet steel case, REMS Ax-Press 15 and 40
Sheet steel case, REMS Akku-Ex-Press
Sheet steel case, REMS Akku-Ex-Press Mini
1.2. Capacity
REMS Mini-Press ACC
Radial press for making press joints in all
standard press fitting systems on steel pipes,
stainless steel pipes, copper pipes, plastic pipes,
composite pipes
Radial presses for making press joints in all
standard press fitting systems on steel pipes,
stainless steel pipes, copper pipes, plastic pipes,
composite pipes
Axial presses for making compression sleeve joints
(sliding sleeve joints) on stainless steel pipes,
steel pipes, copper pipes, plastic pipes,
composite pipes and for expanding plastic pipes,
composite pipes
REMS Akku-Ex-Press Mini Q & E for expanding of
pipes/coil for the System Wirsbo Quick & Easy
REMS Akku-Ex-Press Q & E for expanding of PE-X pipes
for the System Wirsbo Quick & Easy
1.3. Thrust / pressing power
Thrust of radial presses
Pressing power of radial presses
Thrust of radial press Mini
Pressing power of radial press Mini
Pressing power REMS Ax-Press 15
Pressing power REMS Ax-Press 40
1.4. Electric Data
REMS Power-Press E,
REMS Power-Press,
REMS Power-Press ACC
REMS Akku-Press,
Ax-Press 15/40, Akku-Ex-Press
REMS Akku-Ex-Press Mini Q & E,
REMS Mini-Press ACC
Rapid charger (1h)
Voltage supply 230 V
1.5. Dimensions
REMS Power-Press E
REMS Power-Press,
REMS Power-Press ACC
REMS Mini-Press ACC
REMS Akku-Press,
Akku-Press ACC
REMS Ax-Press 15/40
REMS Akku-Ex-Press Mini
REMS Akku-Ex-Press
572100
1.6. Weights
577001
REMS Power-Press E drive unit
577000
REMS Power-Press drive unit
578000
REMS Power-Press ACC drive unit
571000
REMS Mini-Press ACC drive unit without battery
571001
REMS Akku-Press drive unit without battery
573001
REMS Ax-Press 15/40 drive unit without battery
573005
REMS Akku-Ex-Press Mini drive unit without battery
575002
REMS Akku-Ex-Press drive unit without battery
575001
REMS battery 12 V
571510
Pressing tongs (average)
571535
Pressing tongs Mini (average)
565220
Pressing heads (pair, average)
570280
Expanding head (average)
570280
570280
1.7. Noise information
575280
Emission at workplace
571280
573280
573280
575280
1.8. Vibrations
Weighted effective value of acceleration
Ø 10–40 mm

2. Preparations for Use

For use of the REMS pressing tongs, REMS pressing heads and REMS
expanding heads for the various pipe connection systems, the currently
Ø 10–76 (108) mm
valid REMS sales documents are applicable. If the system manufacturer
alters components of pipe connection systems or markets new ones, their
current application status must be enquired about at REMS (Fax +49 7151
17 07 - 110).
Ø 12–32 mm
2.1. Electrical connection
Note the mains voltage! Before connecting the drive unit or the rapid char-
up to Ø 32 mm ger, check whether voltage on the rating plate matches the mains voltage.
230 V 1~; 50-60 Hz; 450 W; 1.8 A
S3 15% (AB 2/10 min)
all-insulated (73/23/EWG)
interference-suppressed
(89/326/EWG)
12 V =; 2.0 Ah; 20 A
12 V =; 1.3 Ah; 18 A
Input 230 V~; 50-60 Hz; 1.0 A
12–18 V – - --; 2.65 A, 50 W
Output
Input 230 V~; 50-60 Hz
12 V – - --; 1.0 A
Output
430×110×85 mm (16.9"×4.3"×3.3")
365×235×85 mm (14.4"×9.2"×3.3")
288×260×80 mm (11.3"×10.2"×3.1")
338×290×85 mm (13.3"×11.4"×3.3")
330×320×85 mm (13"×12.6"×3.3")
293×248×80 mm (11.5"×9.8"×3.1")
300×290×85 mm (11.8"×12.6"×3.3")
REMS Power-Press E
REMS Power-Press / Power-Press ACC 77 dB(A)
REMS Mini-Press ACC
REMS Akku-Press
REMS Ax-Press 15/40
REMS Akku-Ex-Press Mini
REMS Akku-Ex-Press
eng
Ø 15–40 mm
32 kN
100 kN
24 kN
70 kN
15 kN
40 kN
4.4 kg (9.6 lb)
4.6 kg (10.0 lb)
4.6 kg (10.0 lb)
2.1 kg (4.5 lb)
4.5 kg (9.8 lb)
4.3 kg (9.4 lb)
2.0 kg (4.4 lb)
3.2 kg (7.0 lb)
0.7 kg (1.5 lb)
1.8 kg (3.9 lb)
1.2 kg (2.6 lb)
0.27 kg (0.6 lb)
0.16 kg (0.3 lb)
82 dB(A)
72 dB(A)
73 dB(A)
75 dB(A)
77 dB(A)
73 dB(A)
2.5 m/s 2